05/06/2008, LNG Carrier Power
This paper investigates the DFDE propulsion plant from different angles, discusses the benefits of different engine configurations, and demonstrates that the multi-engine DFDE plant with the right configuration provides full maintainability at any time of the voyage and, in addition, matches traditional steam propulsion systems in terms of fuel flexibility.
 
14/03/2008, Low Container Ship Speed Facilitated by Versatile ME/ME-C Engines
Recently, fuel oil prices have risen to unprecedented levels, bringing fuel oil consumption of diesel engines more into focus than for a long time. At the same time, exhaust gas emissions in general and CO2 emission in particular are top priorities.
 
13/11/2007, LNG Carriers ME-GI Engine with High Pressure Gas Supply System
This paper describes the innovative design and installation features of the fuel gas supply system for an LNG carrier, comprising multistage low temperature boiloff fuel gas compressor with driver and auxiliary systems, highpressure piping system and safety features, controls and instrumentation. The paper also extensively describes the operational control system required to provide full engine availability over the entire transport cycle. Written in coorporation with Burchard Compression
 
06/11/2007, CP Propeller - Product Information
The purpose of this Product Information brochure is to act as a guide in the project planning of MAN Diesel´s Alpha propeller equipment. The brochure gives a description of the basic design principles of the Alpha Controllable Pitch (CP) propeller equipment. It contains dimensional sketches, thereby making it possible to work out shaft line and engine room arrangement drawings. Furthermore, a guideline to some of the basic layout criteria is given.
 
24/10/2007, Propulsion Trends in LNG Carriers, Two-stroke Engines
Natural gas is a “clean” fuel compared to diesel and heavy fuel oil and, together with an increasing environmental responsibility, there is a rising demand for natural gas worldwide. Where it is not possible to transport natural gas by means of pipelines, the LNG (Liquid Natural Gas) carriers have to take over the transportation because natural gas in liquid form at atmospheric pressure only takes up 1/600 of the natural gas volume.
 
04/10/2007, MAN B&W Low Speed Large Bore Engines Now with Higher Power Concentration
This paper will describe the updating of our S/K80ME-C and K90ME/ME-C engines from a technical and marketing perspective. Owing to the fact that the K types of these engine types were originally designed as offsprings of the L80MC and L90MC engines back in the 1980s, there is substantial cost down potential in updating as well as uprating the engines, also utilising the design features of today.
 
04/10/2007, MAN B&W Low Speed Small Bore Engines Now with Electronic Control
With the new S50ME&B, which will be designated Mk 9, we have introduced a competitive engine designed for new modern hull designs, based on more efficient propellers with a lower optimum propeller speed. The engine will adopt the design features introduced on the smaller ME&B engines, and will be introduced with a mep of 21 bar at 117 rpm.
 
04/10/2007, Service Experience 2007, MAN B&W Engines The ME/ME-C and MC/MC-C Series
The introduction of the electronically controlled camshaft-less low speed diesel engines is proceeding rapidly, with many ME engines ordered and, consequently, many ME engines entering service. At the time of writing, more than 300 ME engines are on order or have been delivered. This number proves the market’s acceptance of this technology. Of the ME engines, 82 are in service as of January 2007, and they range from the L42ME engine up to the K98ME/ ME-C engines.
 
04/10/2007, Propulsion Trends in Bulk Carriers
Bulk carriers, container vessels and tankers are the three largest groups of vessels within the merchant fleet and, therefore, this market segment deserves great attention.
 
04/10/2007, Two-stroke Stationary Reference List
 
02/10/2007, Propulsion Trends in Tankers
The purpose of this paper – dealing with tanker sizes above 5,000 dwt, and based on an analysis of tankers built/ordered over the last eight years – is to illustrate the latest ship particulars used for modern tankers, and to determine their impact on the propulsion power demand and main engine choice, using the latest MAN B&W two-stroke engine programme as the basis.
 
22/06/2006, Selection of LNG Carrier Propulsion Systems
The economical benefits of the different modern LNG carrier propulsion systems depend on many factors. MAN Diesel has developed a method, which permits to compare the profitability of different propulsion systems for all possible oil- & gas price combinations in just one chart – the charterer nomogram.
 
16/03/2006, Shaft Generators for MC and ME engines
The purpose of this paper is to provide detailed information about the various aspects related to the application of shaft generators on the MAN B&W MC and ME series of engines. In this paper the individual types of shaft generators are defined and their physical configuration is described together with the interface with the diesel engine.
 
08/02/2006, Service Experience of the ME Series of Engines
 
08/02/2006, Ship Propulsion - Basic Principles of Ship Propulsion
For the purpose of this paper, the term “ship” is used to denote a vehicle employed to transport goods and persons from one point to another over water. Ship propulsion normally occurs with the help of a propeller, which is the term most widely used in English, although the word “screw” is sometimes seen, inter alia in combinations such as a “twin-screw” propulsion plant.
 
11/01/2006, A Guideline to the Unified Technical File
Regulations for the Prevention of Air Pollution from Ships. In connection with the International Maritime Organization (IMO) Annex VI of Marpol 73/78 – Regarding the Prevention of Air Pollution from Ships, MAN B&W Diesel has prepared the following guidelines to a unified technical file.
 
26/11/2005, Operation on Low-Sulphur Fuels Two-Stroke Engines
The average sulphur content of fuel oil used for marine diesel engines is 2.7%. This will undoubtedly change with the coming emission legislation, which will lower the emission limits of SOx, NOx, particulate, HC and CO.
 
26/11/2005, Propulsion of Offshore Support Vessels
The development of the offshore propulsion business at MAN Diesel dates back to the early 1970s, and has since then not only been focused on supplying complete propulsion systems but has also been concentrated on the associated know-how and technology. The demand for system engineering and package responsibility has grown in recent years. One reason is the reduced technical staff at most shipyards in combination with outsourcing of technical work to consultants and partners.
 
19/07/2005, Thermo Efficiency System
Following the trend of required higher overall ship efficiency since the first oil crisis in 1973, the efficiency of the main engines has increased and, today, the fuel energy efficiency is about 50% This high efficiency has, among others,led to a correspondingly lower exhaust gas temperature after the turbochargers.
 
20/05/2005, ME-GI Engines for LNG Application System Control and Safety
Until the end of 2004 there was still one market for ocean-going cargo ships to which the two-stroke engine had not yet been introduced: i.e. the LNG market. This market has so far been dominated by steam turbines, but the first orders for two-stroke diesel engines were given at the end of 2004. Today, 16 ME engines to LNG carriers have been ordered for eight LNG carriers, which are to be built in Korea, Ref. [1].
 
19/01/2005, Propulsion Trends in Container Vessels
The use of containers started during the Second World War, and the first ship specifically designed for container transportation appeared in 1960, viz. the Supanya, of 610 teu. Particularly, the amount of cargo shipped in containers has increased considerably over the last fifteen years, resulting in a rapid increase in both the number and the size of container vessels during this period.
 
03/01/2005, CoCoS White Paper
The intention with this paper is to give a short and simple overview of home of the elements related to the maintenance, reliability and operation of MAN B&W engines seen from a holistic viewpoint
 
03/01/2005, CoCoS Maintenance
This user-friendly maintenance management system has been designed to keep you better informed about the condition of the engine, giving you the ability to make better decisions concerning the management of the engine.
 
01/09/2004, Emission Control MAN B&W Two-stroke Diesel Engines
The worldwide focus on fuels is generally increasing because of the focus on exhaust gas emissions. During more than 10-15 years, the authorities have been focused on establishing rules for the exhaust gas emissions from marine engines, and today it seems that IMO Annex VI will be ratified in the course of 2004/2005. Hence, the marine industry will be under international regulation.
 
16/08/2004, The all-in-one Diesel Service
Why buy original spare parts? In my long experience, I have seen the benefits of fitting original spare parts – the peace of mind gained from fitting such tried and trusted equipment from the original engine designer, has become more and more important.
 
26/06/2004, New HFO Common Rail System
As an electronic control system with its inherent degrees of freedom, common rail for medium-speed diesel engines offers engine developers a considerably wider spectrum of injection curve design; total combustion will prevent harmful constituents from being produced in the exhaust gas.
 
16/06/2004, Common ElFi / ElVa control valve
Common control valve for electronic control of fuel injection and exhaust valve activation Patent application 10311493.9, as filed 15.03.2003 in the German Patentoffice.
 
16/06/2004, Common ElFi / ElVa control valve
Common control valve for electronic control of fuel injection and exhaust valve activation Patent application 10311493.9, as filed 15.03.2003 in the German Patentoffice.
 
22/04/2004, Soot Deposits and Fires in Exhaust Gas Boiler
The demand for the highest possible overall fuel efficiency is reflected in developments over the last two to three decades in the propulsion market for oceangoing ships. Today, this market is dominated by highly efficient two-stroke low speed diesel engines which run on low quality fuels and utilise (recover) the exhaust gas heat by means of an exhaust gas boiler/economiser.
 
22/04/2004, Basic Principles of Ship Propulsion
Today, the primary source of propeller power is the diesel engine, and the power requirement and rate of revolution very much depend on the ships hull form and the propeller design. Therefore, in order to arrive at a solution that is as optimal as possible, some general knowledge is essential as to the principal ship and diesel engine parameters that influence the propulsion system.
 
02/04/2004, LNG Carrier Propulsion by ME-GI Engines
LNG carriers represent the last stand for the in all other markets practically extinct marine steam turbines. With efficiencies of only about 30%, versus the diesel engines more than 50%, and in combined systems even higher, diesel engines are the propulsion system of choice in the marine industry.
 
02/04/2004, CP Propeller Equipment
The brochure gives a description of the basic design principles of the MAN B&W Alpha controllable pitch (CP) propeller equipment. It contains dimensional sketches, thereby making it possible to work out shaft line and engine room arrangement drawings. Furthermore, a guideline to some of the basic layout criteria is given.
 
09/12/2003, Crankcase Explosions in Two-stroke Diesel Engines
It is generally recognized that the two-stroke diesel engine is the most economical and reliable prime mover, and MAN B&W Diesel always gives high priority to a conscientious development of the product and to providing important information to our customers, to ensure an even higher level of reliability.
 
12/09/2003, New patent application
Technical description in Danish for: Firing Sequence for engines with 10 or more cylinders. 61 specific groups of firing Sequences for the 14-cylinder engine have been specified.
 
02/07/2003, CLEAN II
In the case of transient engine operation, above all for comparatively fast load acceptance, which is typical during vessel manoeuvring, Invisible Smoke measures are not sufficient to achieve low soot values. Whether and how the target of quasi invisible exhaust gas plumes can also be reached under these operating conditions, was clarified in the CLEAN II research project, supported by BMBF.
 
25/06/2003, LNG Carrier Propulsion by ME Engines and Reliquefa
LNG carriers represent the last stand for the – in all other markets – practically extinct marine steam turbines. With efficiencies of only about 30%, versus the diesel engines' more than 50%, and in combined systems even higher, diesel engines are the propulsion system of choice in the marine industry.
 
25/06/2003, ME-Engines - the New Generation of Diesel Engines
The introduction of the electronically controlled camshaft-less low speed diesel engines, which is now gaining momentum, is a milestone in diesel technology that deserves a place in history like Rudolf Diesel’s first engine in Augsburg, the 1912 motor vessel Selandia, the introduction of turbocharging on two-stroke diesels in 1954,and the first SCR (Selective Catalytic NOx Reduction) systems on ships in 1989.
 
25/06/2003, Operation on Heavy Residual Fuels
MAN B&W Diesels two-stroke low speed diesel engines and MAN B&W Holeby four-stroke diesel GenSets are designed to operate in accordance with the unifuel principle, with the same fuel for both main and auxiliary diesels.
 
11/04/2003, Quick Guide to Propulsion Packages
Fully integrated propulsion solutions, based on MAN B&W low-speed two-stroke engines, four-stroke medium-speed engines, reduction gearboxes, controllable pitch propellers and control systems.
 
10/04/2003, CP Propeller Equipment
The purpose of this manual is to act as a guide line in the project planning of the MAN B&W propeller equipment. The manual gives a description of the basic design principles of the MAN B&W controllable pitch (CP) propeller equipment.
 
10/04/2003, Alphatronic Remote Control System
 
10/04/2003, Auxiliary Propulsion System For Two-stroke Engine
 
09/04/2003, Elasto-Hydro-Dynamic Evaluation
For more than a decade, MAN B&W Diesel has developed advanced software to perform in-house evaluation of bearing performance.
 
09/04/2003, MAN B&W Two-stroke Engines for Controllable Pitch
Although mostly installed with fixed pitch propellers, MAN B&W two-stroke diesel engines directly coupled to CPPs is a much-used configuration for engine sizes up to the 70-cm bore. This is particularly the case where off-shore loading is called for or where ‘ice class’ is demanded.
 
09/04/2003, Lubricator System for Cutting the Cylinder Oil
The cylinder lube oil consumption represents a large expenditure for an engine operating with the nominal guiding feed rate and, especially for the large bore engines, even a 0.1 g/bhph reduction in the cylinder oil dosage represents a significant yearly saving for the owner.
 
09/04/2003, Alpha Adaptive Cylinder-oil Control
The Alpha Lubricator System, Fig. 1, available for all MAN B&W MC/MC-C two-stroke engines, has an algorithm controlling cylinder oil dosage proportional to the sulphur content in the fuel. This algorithm is referred to as Alpha Adaptive Cylinder-oil Control (Alpha ACC).
 
09/04/2003, Maintenance and Safety Aspects
When designing a new engine type, the maintenance and service aspects are of great importance, Fig. 1. The safety aspects are of importance during the production, assembly, testing and installation of the engines at the licensees and the shipyards and, naturally, it is also of importance when the ship enters service.
 
09/04/2003, MAN B&W Two-stroke Engines for Controllable Pitch
 
09/04/2003, Bearings
The MC engines were originally designed with white metal bearings for the crosshead, crankpin and main bearings. The main bearings were of the so-called thick shell design, whereas the crosshead and crankpin bearings were of the thin shell design
 
09/04/2003, The First Commercial ME Engine
After a highly successful experience with the prototype 6L60MC/ME engine, Odfjell ASA, Norway, commissioned the World’s first dedicated ME engine, a 7S50ME-C, from MAN B&W Diesel’s Frederikshavn Works.
 
07/02/2003, Copy of CLEAN II
 
22/01/2003, The electronically controlled engine
With the introduction of the electronically controlled engine (the ME engine),MAN B&W Diesel is offering an engine with reduced running costs, better emission characteristics and a high degree of flexibility in terms of operating modes.
 
22/01/2003, PMI System Pressure analyser
User friendly Cylinder Pressure Analyser... One-person operated tool with easy-to-use user-interface. Takes less than 15 minutes to collect and display a complete set of measurements. Reliable and precise measurement of cylinder pressure...Uses a high performance piezo-electric pressure transducer and an advanced crank angle trigger system for determining.
 
22/01/2003, PMI System Pressure analyser
 
15/01/2003, Describes Turbochargers
 
08/10/2002, Uni-concept Auxiliary Systems for Two-Stroke Main
 
08/10/2002, Emission Control Two-Stroke Low-Speed Engines
 
08/10/2002, Emission Control Two-Stroke Low-Speed Engines
 
08/10/2002, Shuttle Tanker Propulsion
 
08/10/2002, Installation Aspects of MAN B&W Main and Auxiliary
When the required vessel power profile has been evaluated and determined, both with regard to propulsion load and electrical load, the next step is to design the engine room configuration so that it will also be optimal with regard to installation, operation and maintenance. MAN B&W Holeby has not only looked at this as an isolated case for the L16/24 type auxiliary engines but, as described in the following, has also looked at it in relation to the MAN B&W twostroke main engine on board.
 
08/10/2002, Installation Aspects of MAN B&W Main and Auxiliary
 
08/10/2002, Container Ship Propulsion
 
08/10/2002, Low Speed Engines in Stationary Diesel Power Plant
 
08/10/2002, Vibration Characteristics of Two-Stroke Low Speed
 
08/10/2002, Foundation Concept for Stationary Low-Speed Diesel
 
01/10/2002, Alpha Adaptive Cylinder-oil Control
 
24/05/2002, FROM PIELSTICK PC2 TO MAN B&W V40/50
Performance and potential for Fast Ferry Applications of a new four-stroke engine.
 
04/03/2002, Diesel Engines and the Environment - Noise
 
04/03/2002, Diesel Engines and the Environment - Noise
 
24/02/2002, The New MAN B&W 48/60B Engine
 
16/08/2001, Considerably reduced NOx and Smoke
 
08/08/2001, Very Large Diesel Engines
 
17/04/2001, Reducing Engine Room Overhauling Height
 
30/03/2001, New patent application regarding cyl. lubrication
Submitted 30/3/2001 Publishing of German patent application no. DE 101 12 691 A0 filed 16.03.2001. Regarding "Oil feed control in relation to sulphur content".
 
08/12/2000, The Intelligent Engine: Prospects
 
28/08/2000, Introduction Vibration
 
16/02/2000, Diesel Engines and Gas Turbines
In comparison to a COGES system, Diesel-electric solutions have clear advantages in many aspects, with the exception of weight and size, and NOx emission and noise.
 
05/01/2000, Trends propulsion machinery demand
 
01/11/1999, Containership Propulsion - beyond Post-Panamax
 
07/05/1999, Computerised Engine Application System (CEAS)
 
22/02/1999, Propulsion of VLCCs
 
30/11/1998, Hydrodynamics of Ship Propellers
 
30/11/1998, Copy of Hydrodynamics of Ship Propellers
 
30/11/1998, Hydrodynamics of Ship Propellers
 
26/11/1998, Utilisation of Volatile Organic Compounds
 
25/04/1998, Diesel-electric propulsion